Have you ever imagined what happens when water seeps into the cracks of a building structure? Problems such as cracks, damage, and excess moisture can arise without realizing it. That’s why it’s important that you install a waterstop!
Waterstop is an important element that serves to prevent leaks in concrete joints, especially in areas that are prone to water. But, installing a waterstop cannot be done carelessly. If you make the wrong move, the protection it is supposed to provide will be less effective.
So, how do you install a waterstop correctly? Let’s see the full explanation in this article so that your building remains sturdy and free from leakage problems!
How to Install a Waterstop?
There are many types of waterstop, ranging from PVC, rubber, to metal, and choosing the right one is very important! But, it’s not just about choosing the right one, it’s also about installing it the right way for maximum results. Not sure where to start? Here’s how it’s done.
1. Preparing the Installation Area
First, make sure the work area is clean and ready to use.
Clean the concrete surface from dust, oil, or other dirt so that the waterstop can stick well.
Don’t forget to prepare tools such as tweezers, special adhesives (if necessary), and measuring tools. With this preparation, the work will be faster and neater.
If the area is clean and tidy, the waterstop is easier to install and does not shift easily when the concrete is poured.
2. Waterstop Cutting and Placement
Once the area is ready, proceed to the cutting and placing of the waterstop.
Measure the length of the concrete joint carefully, then cut the waterstop to size. Use a sharp tool so that the results are precise.
Place the waterstop in the center of the concrete joint, and make sure its position does not change.
You need to know, if you measure it wrong or position it incorrectly, the function of the waterstop could be less than optimal.
3. Waterstop Tightening
The waterstop must be tightened properly so that it does not shift during casting.
Use a clamp: A special clamp helps keep the waterstop in position while the concrete is being poured. One commonly used clamp is nails and bendrat wire, but there are also waterstop that have special glue to stick to the old concrete.
Double check: Before casting, double-check that the positioning and fastening are correct. This prevents technical problems in the future.
To prevent the waterstop from shifting during casting, make sure it is tight.
Use a special clamp to help the waterstop stay in place.
Before starting the casting, make sure the position and tightening are okay again.
This simple way of installing the waterstop is important to avoid problems later.
4. Concrete Casting Process
When casting, do not rush to keep the waterstop in its original position.
Make the casting gradually so that the waterstop is not exposed to excessive pressure.
Make sure there are no air voids around the waterstop that can cause leaks to appear.
5. Final Inspection
After the concrete has hardened, it’s time to check the work.
Try pouring water into the joint, just in case there is a leak that needs to be repaired.
If there are gaps or imperfections, fix them immediately before the problem becomes bigger.
That’s how to install a waterstop so that your building is protected from leaks. The installation process does require extra attention, but your concrete joints will be maximally protected, and the building will be more durable. One of the mainstay waterstop products from Estop is the Estopper CJ/EJ series and the Estopper hydrophilic series.
When it comes to quality, make sure to choose the best waterstop for your project. Well, PT Hissan Trading Indonesia comes with superior quality waterstop products that have become the first choice of construction professionals. With various types of waterstop and services that are ready to help, we are ready to ensure your project runs smoothly and the results are optimal.
Come on, visit the official website of PT. Hissan Trading Indonesia to see a complete selection of waterstop products and find the one that best suits your needs!
