Description
5 kgs set
1 m2/liter at 1 mm thickness These figures are for guidance only. Actual coverage will depend on the texture and porosity of the surface being covered.
Estobond EC should be stored on pallets in cool and dry conditions. The product shelf life is of 12 months. It shall be protected from high humidity and extreme heat.
Application Instructions
Surface Preparation
All surfaces to be treated must be firm, dust-free and clean. All laitance should be removed mechanically.The surface should be washed thoroughly with clean water and all traces of surface water removed.
Mixing
Estobond EC is supplied in pre-measured quantities with a total volume of 5 kgs. Add all the curing agent (clear) to the dark grey resin and mix thoroughly. Mix until an even grey colour, free from streaks is obtained.
Application
Apply mixed adhesive with a spatula / gloved hand. Use within its pot life and bring surfaces together promptly. For extended pot life, spread the adhesive thinly (less than 20 mm) to dissipate heat.
Cleaning
All tools and equipment should be cleaned immediately after use. Hardened adhesive can only be removed mechanically.
Technical Support
Estop provides high-performance products for new and existing concrete surfaces, along with technical support and on-site assistance for specifiers, users, and contractors.
Precaution
Avoid skin contact with the product. Use gloves and barrier cream. Wash skin with soap and water if contact occurs, and rinse eyes with water if contaminated, seeking medical help. Ensure good ventilation.
Reviews
There are no reviews yet.