Description
Estobond EP-X is a two component, solvent free epoxy resin system consisting of a mixed grey resin and special fillers in pre-measured quantities for easy on-site mixing.
5 kgs set (Base : Hard) = 3 : 1
Base color : Light grey
Hard color : Yellowish
Mix color : Light Grey
1 m2/liter at 1 mm thickness These figures are for guidance only. Actual coverage will depend on the texture and porosity of the surface being covered.
Estobond EP-X should be stored on pallets in cool and dry conditions. The product shelf life is of 12 months. It shall be protected from high humidity and extreme heat.
Application Instructions
Surface Preparation
Surfaces must be firm, clean, and dust-free. Remove laitance mechanically. The surface should be washed thoroughly with clean water & all traces of surface water removed.
Mixing
Estobond EP-X comes in 5 kg pre-measured quantities. Mix all curing agent with the resin until an even grey colour, free from streaks is obtained.
Application
Apply mixed adhesive with a spatula, trowel, or gloved hand. Use within pot life and bond surfaces promptly. To extend pot life, spread thinly (less than 20 mm) to dissipate heat.
Cleaning
All tools and equipment should be cleaned immediately after use. Hardened adhesive can only be removed mechanically.
Technical Support
Estop provides high-performance products for new and existing concrete surfaces, along with technical support and on-site assistance.
Precaution
Avoid skin contact; use gloves and barrier cream. Wash skin with soap and water if needed, rinse eyes with water, and seek medical help. Ensure ventilation.
Reviews
There are no reviews yet.