Advantages
BS 5350:Part C15:1990
| Appearance | Milky White |
| Specific Gravity | 1.00 – 1.06 |
| Solid Content | 23 – 25% |
| pH | 4 – 5 |
20 Kg pail
200 Kg/ drum
4 – 6 m2 per Kg depend on
porosity of substrates
Application
Surface Preparation
The substrate must be sound, clean, free of dust, loose particles. All cement laitance, oil, grease, and dirt must be removed.
As a Bonding of new concrete to old concrete
Saturate old concrete with water. Thin Estobond PVA with clean water (1-2 liters per 20 kg) if too thick. Apply with a brush in a stippling motion for full coverage. Apply Estopatch repair materials immediately while primer is wet. Reapply if Estobond PVA dries over 8 hours at 20°C.
As a plaster bonding agent and cement rendering
Seal the surface & prime with Estobond PVA : water = 1:1 add with cement. Then plaster/render while the bonding is still tacky.
Storage
Store Estobond PVA in a dry, covered place. It has a 12-month shelf life unopened, but less in extreme heat.
Precaution
Estobond PVA is non-toxic. It is slightly alkaline; therefore, skin contact shall be avoided. Wear gloves and protective clothing.
Additional Information
Estop manufactures a wide range of products including waterstops, waterproofing, grouts, anchors, specialized flooring, and spalled concrete repair.
Reviews
There are no reviews yet.