Description
Estoform OB is specially blended with high efficient releasing properties. It is reacts with alkalis in the water at the interface of the concrete an formwork to produce a thin film of lime soap that prevents formation of any bond between concrete and
formwork, enabling the easy striking of formwork.
| Specific Gravity at 25oC | 0.90 – 0.95 kg/L |
| Appearance & colour | Natural oil liquid / Brown |
210 liter drum
20 liter pail
| Non-Absorbent (steel) | 20 – 25 m2/L |
| Timber / plywood | 10 – 15 m2/L |
Application Instructions
Surfaces must be clean and free from contaminants like oil, grease, or loose particles. Remove all contaminants without damaging the formwork. Apply Estoform OB evenly using a low-pressure sprayer, sponge mop, roller, or brush. Remove excess and avoid puddles. Apply before placing reinforcing steel and re-coat before each use. If there’s a delay of over 48 hours, re-coat. Protect from rain and clean the mould surface between uses to prevent concrete build-up.
Cleaning
The spillages of Estoform OB should be absorbed into sand, earth or vermiculite and transfer to suitable container.
Technical Support
Estop provides high-performance repair products for concrete surfaces and offers technical support and on-site assistance.
Precaution
Avoid swallowing or contact with skin and eyes. Wear gloves and goggles. If ingested, seek immediate medical attention.
Reviews
There are no reviews yet.