Description
Estogrout MP 70 non-shrink grout provides high flexural and compressive strength performance. It is a ready to use product in powder form and requires addition of water to produce as non-shrink grout performance.
25 kg bag
- Non Shrink (Shrinkage Compensated)
- Proven and predictable performance
- Excellent workability retention even at high ambient temperature tight contact with all grouted surfaces
- High bond strength to steel and concrete
- Early strength development even at flow able consistency
- Good fatigue and impact resistance
- Micro silica content enhances strength and durability
- No metallic content to cause staining
Application Instructions
Surface Preparation
Ensure the substrate is clean, sound, and free from oil, grease, or loose material. Clean bolt holes and fixing pockets of debris. Pre-soak the substrate with water for at least 2 hours to aid grout bonding.
Base Plate
It is essential that this is clean and free from oil, grease or scale. Provide air pressure relief holes to allow venting of any isolated high spots.
Formwork
All formwork used for grouting should be leak proof. This can be achieved by sealing it with a foam rubber strip or sealant.
Application 1
Estogrout MP 70 can be poured in thicknesses from 10mm to 100mm for underplate grouting. For thicker sections, use Estogrout MP 70 Premix, which includes silt-free aggregate to minimize heat buildup (refer to Estogrout MP 70 Premix data sheet).
Application 2
Grout bolt pockets before pouring between substrate and base plate. Ensure continuous grout flow with sufficient preparation. Start pouring from one side to prevent air or water trapping. Maintain a grout head for continuous flow, for large volumes, use a heavy-duty diaphragm pump or similar equipment.
Curing
On completion of the grouting operation, all exposed areas, which are not to be cut back, should be thoroughly cured. Apply suitable curing membrane such as Estocure P or continuous application of water after initial set, for curing purpose.
Storage
Estogrout MP 70 should be stored on pallets in dry conditions. Under these conditions, the product will have a shelf life of 12 months. Shelf life may reduce if stored in extreme heat locations.
Precaution
Estogrout FP 70 is alkaline and should not be in contact with skin and eyes. Avoid inhalation of dust during mixing. Wear gloves, goggles and dust mask.
Additional Information
Estop manufactures a wide range of products, including waterstops, waterproofing products, grouts, anchors, specialized flooring products, and formulations for repairing spalled concrete.
Reviews
There are no reviews yet.