Uses
• To improve waterproofing property of concrete and mortar
• A cost effective means of reducing concrete permeability and thereby reducing penetration
20 litre & 200 L
• ASTM Type A
• BS 5075 : Part 1 : 1982
• CRD-C 163-192
Cement : >350 Kg / m3
Water Cement Ratio : 0.4
Initial Slump : 80 +_ 20 mm
Application Instruction
Estop Admix WP2000 should be dispersed in water before adding to concrete or Portland cement mortar mixes. If added to a transit or ready-mix truck, mix for at least one minute before discharging.
Estop Admix WP2000 is chloride-free and compatible with most retarding plasticizers and superplasticizers. Contact Estop technical department for details.
Typical Dosage
Use Estop Admix WP2000 at 0.6% - 2% of cement content. Optimal dosage should be determined by site trials. It reduces water-cement ratio by about 10%, enhancing compressive strength.
Technical Support
Estop offers a technical support package to specifiers, end-users and contractors, as well as on-site technical assistance.
Storage
Store in dry & covered condition. Estop Admix WP2000 has a shelf life of 12 months in an unopened container. If stored in extreme heat condition, the shelf life may be reduced.
Precaution
Wear protective gloves and goggles. If swallowed, seek immediate medical advice and don't induce vomiting Estop Admix WP2000 is water-based and non-flammable.
Additional Information
Estop manufactures provides a wide range of complementary products including waterstops, waterproofing, grouts, anchors, specialized flooring, and concrete repair solutions.
Reviews
There are no reviews yet.