Description
Estoproof 200 is a self-adhesive polymer-bitumen binder on a unique high-performance cross laminated film.
The structure of strong overlapped double-layer film plus vertical and horizontal mesh make the performance of tensile strength, dimensional stability, heat stability and UV resistance largely improved.
• ASTM D412
• ASTM E96
Estoproof 200 = 1m x 20m roll
Estoflex GP as primer = 20 kg pail/ 200 kg drum
Estoflex GP as primer (dilute 70 : 30 with water) = 3m2 per kg
Estop offers a comprehensive range of high performance,
high quality of repair product for both new and existing
concrete surfaces. In addition, the company offers a
technical support package to specifies, end-users and
contractors, as well as on site technical assistance.
Estoproof 200 membrane should be stored in original unopened packaging in dry conditions. However, membrane shall be stored vertically and not
stacked.
There is no hazards associated with the use these products.
Application Instruction
Preparation
Prepare the substrate by float finishing to remove contamination and projecting aggregates. Apply Estoflex GP Primer (diluted 70:30 with water) at 3m²/kg using a roller or brush and allow it to dry completely. Remove the cross-laminated film from the membrane and firmly press it onto the substrate to ensure continuous bonding without air pockets. For the first membrane, cut the release film, lift it at a 30-degree angle, and press it onto the substrate. For the second membrane, pre-apply and overlap it with the previous membrane by at least
Protection
The membrane should be protected immediately after application with Protection Board or cement/ sand screed.
Additional Information
Estop manufactures and offers a wide range of products, including waterstops, waterproofing products, grouts, anchors, specialized flooring products, and a variety of products for repairing and refurbishing spalled concrete.
Reviews
There are no reviews yet.