Description
A three-component product based on pure epoxy resin (solvent-free) and epoxy hardener, along with graded aggregates to achieve the correct compressive strength. Estorex EPS 75 is specially designed for filling construction joint gaps with a thickness of 10-75 mm. It has strong adhesion to almost all surfaces and is suitable for heavy loads.
8 liters / set (after mixing)
- Part A (base): 3.75 kg
- Part B (hardener): 1.25 kg
- Part C (filler): 11.50 kg — total 16.5 kg per set
2.1 kg / m2 / mm or 1 L / m2 / mm
Application Instructions
Preparations
Clean the concrete surface of dirt, oil, grease, loose material, dust, and other contaminants that could reduce the adhesion of Estorex EPS 75 to the concrete joint surface.
Mixing
Mix component B into A with a low-speed hand mixer (500 rpm) for 3 minutes, using start-stop motion for 3 minutes, then add component C. After mixing thoroughly, apply immediately.
Application
Applied within its 50-70 minute working time. Use tools for continuous flow to avoid air entrapment, and match mixing volume to pouring time, pouring from one side to prevent air pockets.
Warning
Do not mix only a portion of components A, B, and C, Do not apply on wet surfaces, Do not apply on dusty or friable substrates, Do not use to fill expansion joint gaps.
Reviews
There are no reviews yet.