Description
Estotect SWR is a single component penetrating silane- siloxane system which penetrates into porous substrates and then reacts to produce a bonded hydrophobic lining to the pores. Although allowing passage of water vapour from the substrates it significantly reduces the absorption of water and water borne salts. Estotect SWR does not discolour most substrates
and has excellent resistance to weathering.
| Form | Milky White Liquid |
| Viscosity | 200 +/- 20 cps |
| Specific Gravity | 0.98 +/- 0.05 |
Estotect SWR 18 kg Pail
Estotect SWR Estotect SWR 0,3 – 0,5 kg/m2 per mm thickness
consumption.
• Deep invisible penetration
• Fully water repellent in 24 hours
• Colour less and does not affect the original appearance
• Allows walls to breathe
• Minimize efflorescence
• Good water repellency
• Can be applied on damp surfaces
Application Instruction
Ensure surfaces are clean. Apply Estotect SWR by brush or low-pressure spray. For vertical surfaces, apply bottom to top with a 20-30 cm rundown. For horizontal surfaces, apply to saturation. Use 2 coats with a 2-hour interval at 20°C.
Limitations
Estotect SWR requires 24 hours of exposure to the atmosphere before it becomes fully effective, hence it should be applied in dry weather conditions.
Storage
Store in dry areas 5 – 30 C. Do not expose the material to air during storage. Effective shelf life is 12 months.
Precautions
Avoid contact with eyes, mouth and nose. Provide efficient and adequate ventilation during application.
Technical Support
Estop provides high-performance, quality concrete repair products and global technical support, including on-site assistance.
Additional Information
Estop offers a variety of products including waterstops, waterproofing, grouts, anchors, specialized flooring, and concrete repair solutions.
Reviews
There are no reviews yet.