Description
Estotect Zincrich is supplied as a single component grey coloured liquid based on metallic zinc and epoxy resins.
Estotect Zincrich 1 liter cans
Estotect Zincrich 7.4 m2
/liter
DFT 40 micron
Application Instruction
Preparation
Fully expose any corroded steel in the repair area, remove loose scale and corrosion deposits, and clean the steel to a bright condition, especially focusing on the back of exposed steel bars. Grit-blasting is recommended for this process. If corrosion is due to chlorides, immediately high-pressure wash the steel with clean water after grit-blasting to remove corrosion products from pits and imperfections on its surface.
Application
Apply Estotect Zincrich promptly to dry steel surfaces within 3 hours of preparation. Stir well and apply with a small brush, ensuring full coverage on the back of exposed steel bars. Allow to dry completely before applying a second coat if necessary. Protect primed surfaces until overcoating or applying repair material. Estotect Zincrich protects steel indoors for several months and up to 14 days outdoors. Apply concrete repair materials once Estotect Zincrich is dry (1–2 hours).
Cleaning
Estotect Zincrich should be removed from tools, equipment and mixers with solvent such as Xylene etc, immediately after use.
Limitations
Do not apply Estotect Zincrich below 10°C or if the temperature is falling. For any concerns, contact your local Estop office.
Storage
Estotect Zincrich has a 12-month shelf life in dry, unopened containers, which may be reduced in high temperature or humidity.
Technical Support
Estop offers a wide range of high-performance, high-quality products for the concrete repair and protection industry. The company also provides technical support to specifiers, end users, and contractors, along with on-site technical assistance globally.
Precaution
Estotect Zincrich contains epoxy resin, which may cause skin sensitivity. Avoid skin contact, wear gloves, and apply a barrier cream. It is flammable; keep away from ignition sources, and use CO₂ or foam to extinguish fires—do not use water jets.
Additional Information
Estotect Zincrich contains epoxy resin, which may cause skin sensitivity. Avoid skin contact, wear gloves, and apply a barrier cream. It is flammable; keep away from ignition sources, and use CO₂ or foam to extinguish fires—do not use water jets.
Reviews
There are no reviews yet.