Advantages
- Excellent adhesion to concrete substrate – Ensures transfer of loads
- Solvent free – Low VOC and non-shrink
- Pre-packaged – avoids on site errors ensuring quality control
- Cures at low temperatures – suitable for a range of climates
EstoWrap Primer is available in 15kg sets.
EstoWrap Primer can be stored in tightly closed original containers for 12 months at a moderate temperature.
For the full health and safety hazard information and how to safely handle and use this product please make sure that you obtain a copy of the ESTOP Material Safety Data Sheet (MSDS) from our
office or our website.
Application
Surface Preparation
Clean surfaces thoroughly to remove any grease, oil, dust, curing compound residues, or contaminants. Repair spalled concrete with suitable Estop products. Remove laitance by light blasting or brushing. Apply EstoWrap Primer using a roller or brush and wait for it to dry before proceeding.
Mixing
Mechanically mix base before adding hardener. When component B has been added, mix for approximately 2 minutes or until a homogenous mix has been obtained.
Application of EstoWrap Primer
Apply EstoWrap Primer by brush or roller at 0.3 kg/m² on the prepared substrate. Mix only as much primer as can be used within its pot life. Allow the primer to become tack-free before applying EstoWrap Resin.
Estimating Data
Typical consumption of 0,3kg/m2 however actual consumption will vary as per the substrate conditions.
Reviews
There are no reviews yet.