Description
Estogrout MP 50 multipurpose cementitious non- shrink cement grout is formulated to provide good flexural and compressive strength performance. Itis a ready to use product in powder form and requires addition of water to produce as non-shrink grout performance. Estogrout MP 50 is a blend of Portland cement, graded fillers and chemical additives that create controlled expansion in the plastic state.
• ASTM C940
• ASTM C109
25 kg bag
50 13.0 liters per 25 kg bag
10 mm x 1.30 m2 per 25 kg bag
- Non Shrink (Shrinkage Compensated)
- Chloride free & Adjustable consistency
- No metallic iron content to cause staining
- Excellent workability retention even at high
ambient temperature - Pre-packaged grout overcomes potential on-
site proportioning variations - High bond strength to steel and concrete
- Good fatigue and impact resistance
Application Instructions
Foundation Surface
The substrate must be sound, clean, and free from oil, grease, and loose material. Clean bolt holes and fixings. Pre-soak with water to aid bonding.
Base Plate
It is essential that this is clean and free from oil, grease or scale. Air pressure relief holes should be provided to allow venting of any isolated high spots.
Formwork
All formwork used for grouting should be leak proof. This can be achieved by sealing the joints/gap between formworks with a foam rubber strip or sealant.
Mixing Water
The quantity of clean water required to be added to a 25kg bag of Estogrout MP 50 to achieve the desired flowable consistency is 3.9 — 4.0 litres
Application
Can be poured up to 50mm thick. For thicker sections, add well-graded aggregates (3mm to 15mm), not exceeding 50% by weight.
Curing
After grouting, cure all exposed areas that won't be cut back by continuously applying water or using Estocure Product Range curing compound.
Storage
Estogrout MP 50 should be stored on pallets in dry conditions. Under these conditions the product will have a shelf life of 12 months.
Precaution
Estogrout MP 50 is alkaline and should not in contact with skin and eyes. Avoid inhalation of dust during mixing. Glovers, goggles and dust mask should be worn.
Technical Support
Estop offers a wide range of high-performance repair products for both new and existing concrete surfaces, with technical support for specifiers, end-users, contractors, and on-site assistance.
Additional Information
Estop manufactures a wide range of products, including waterstops, waterproofing products, grouts, anchors, specialized flooring products, and formulations for repairing spalled concrete.
Reviews
There are no reviews yet.